一种增强型冲突分解算法

冲突分解算法是一种能有效改善无线信道多址接入协议的方式。本文对传统的冲突分解算法——树形冲突分解算法和先到先服务冲突分解算法进行了深入研究和仿真，探讨了这两种算法的优点和不足之处，提出了一种增强型的冲突分解算法（Enhanced Splitting Algorithm，ESA）。该算法继承了树形冲突分解算法和先到先服务算法的优点，不仅考虑了碰撞分组产生的时间，还考虑了分组的产生间隔，从而有效地提高了冲突分解算法的性能。仿真结果显示ESA算法是一种可行的算法。     

A fictitious domain decomposition method for the solution of partially axisymmetric acoustic scattering problems. Part 2: Neumann boundary conditions

We present a fictitious domain decomposition method for the fast solution of acoustic scattering problems characterized by a partially axisymmetric sound‐hard scatterer. We apply this method to the solution of a mock‐up submarine problem, and highlight its computational advantages and intrinsic parallelism. A key component of our method is an original idea for addressing a Neumann boundary condition in the general framework of a fictitious domain method. This idea is applicable to many other linear partial differential equations besides the Helmholtz equation. Copyright © 2003 John Wiley & Sons, Ltd.     

结构-波浪-海床耦合系统中大圆筒结构的波压力响应

以沉入式大圆筒结构为对象，通过设计随机波浪水槽实验，测取了在单筒和连续筒两种结构型式、两种沉入深度和两种波谱输入下结构表面的动波压力分布。波面高度以及波压力历程均在领域进行分析。通过计算结构表面沿高程和沿环向的波压力谱及波压力传递函数，将单筒实测结果与基于线性绕射理论的解析解进行了比较，同时也详细对比了两种结构型式下的实测结果。文中汇报了在研究中获得的新发现及进行的相应分析，特别是在结构——波浪——海床动力相互作用下对波压力响应机理以及针对连续筒的研究，可为工程应用提供有价值的参考。     

A frequency domain approach to fault detection in sampled-data systems

This paper deals with fault detection problems in sampled-data (SD) systems. A tool is first introduced for the analysis of intersample behavior of SD systems in the frequency domain from the viewpoint of fault detection and isolation. Based on it, a direct design approach of fault detection systems for SD systems is proposed, and further the problem of full decoupling from unknown disturbances is studied.     

自身相位噪声测量的分析

本文分析一种不需要参考（标准）信号源的相位噪声测量系统，该系统在被测通道里插入窄带晶体滤波器滤除被测信号的大部分噪声，作为参考信号再与被测信号进行比较，实现了信号源自身相位噪声的测量．本文还介绍一种自动相位噪声谱测量装置     

基于邻域统计特性的概率神经网络及其在自动目标识别中的应用

在概率神经的一种改进模型－ＦＤＯ网络的基础上，提出在设计网络收敛域时进一步考虑每一像素点周围８邻域的影响，对网络的作用函数加以修，使改进后的网络具有稳定性好且收敛速度快的优点。通过实验对改进前后网络的识别性能加以比较，证明改进后的网络特别适用于噪声图像的识别。     

铁电体尺寸对其开关特性的影响

应用铁电体极化反转的Orihara Ishibashi理论 ,讨论了圆形铁电薄膜和球形铁电体的开关电流以及开关时间对系统尺寸的依赖性。数值计算表明 ,不论是二维还是三维铁电系统 ,其铁电畴反转过程中产生的开关电流都随系统尺寸减少而下降 ,开关时间随系统尺寸减少而缩短     

Multi-grid domain decomposition approach for solution of Navier–Stokes equations in primitive variable form

A new multi-grid (two-grid) pseudospectral element method has been carried out for solution of incompressible flow in terms of primitive variable formulation. The main objective of the proposed method is to apply the multi-grid technique solving the incompressible flow problems associated with three commonly encountered multi-grid environments. In domain decomposition terminology, it includes (I) partially overlapped subdomains, each of which has same types of grids; (II) partially overlapped subdomains, each of which has different types of grids; (III) local adaptive subdomains fully overlapped with the original computational domain (composite grids). The approach for flow problems, complex geometry or not, is to first divide the computational domain into a number of subdomains with the inter-overlapping area (partially or fully overlapped). In categories I and II, the fine-grid or coarse-grid subdomains can be defined by their representation, while in category III the fine-grid or coarse-grid subdomains are defined as usual. Next, implement the Schwarz Alternating Procedure (SAP) to exchange the data among subdomains, where the coarse-grid correction is used to remove the high frequency error that occurs when the data interpolation from the fine-grid subdomain to the coarse-grid subdomain is conducted. The strategy behind the coarse-grid correction is to adopt the operator of the divergence of velocity field, which intrinsically links the pressure equation, into this process. The solution of each subdomain can be efficiently solved by the direct (or iterative) eigenfunction expansion technique or preconditioned method with the least storage requirement, i.e. O(N²) in 2-D. Numerical results of (i) driven cavity flow (Re = 100,400) with Cartesian grids (category I) in each subdomain, (ii) driven cavity flow (Re = 3200) with local adaptive grids (category III) in each subdomain, and (iii) flow over a cylinder (Re = 250) with ‘O’ grids in one subdomain and Cartesian grids in another (category II) will be presented in the paper to account for the versatility of the proposed multi-grid method.     

Development of a Sensor Fusion Strategy for Robotic Application Based on Geometric Optimization

Fusion of multi-sensor information is an important technology, which is growing exponentially due to its tremendous application potential in many areas. Effective fusion of data from sensors is very critical in increasing an intelligent system's capability to accomplish complex tasks. Appropriate fusion technologies are needed to be developed specially when a system requires redundant sensors to be used. More the redundancy in sensors, more is the computational complexity for controlling the system and more is its intelligence level. This research presents a strategy developed for multiple sensor fusion, based on geometric optimization. Each sensor's uncertainty has been modeled using classical Lagrangian optimization techniques. However, the uniqueness and effectiveness of the present technique lies on the fact that starting from the optimized value as initial estimate the accuracy of the sensory information has further been improved up to any pre defined bounded range, by developing two architectures – FFA (fission–fusion architecture) and FDD (fusion in differential domain). Sufficient evidences and analyses have been provided in the paper to show its effectiveness in various applications.     

湛江发电厂一号机振动的原因分析及处理

对湛江发电厂1号机4号轴瓦振动大的问题进行分析,认为其主要原因为:低压缸变形大导致动静碰摩,轴承座及盘车箱下部脱空引起刚度降低,轴承座的固有频率与工频相近等。对此,采取了相应的处理措施,实施后4号轴瓦振动得到有效解决。